System Options; User Password; Network Settings - Dedicated Micros D4 Guía De Programación

System Options

System Options

User password

Network settings

Audio recording
IR receiver
Timed expiry
Factory default
User password
A password can be set to prohibit unauthorized access to the menu systems.
The default setting is Off.
To set or change the menu password:
1. Use the cursor keys to change the User password to On.
2. When the new password menu is displayed use the camera key numbers to
enter a password - up to eight numbers.
3. Press the menu key to enter the password.
4. When prompted re-enter the password to confirm and press the menu key
when complete.
WARNING: For security reasons, loss of passwords will require the unit to be
returned for the passwords to be reset.
Make a note of your password here __ __ __ __ __ __ __ __
16
Off
Edit
Off
On
Enabled
Disabled
Edit
Reset
Network settings
This option is used to configure the unit for connection to an Ethernet network or
dial-up. A pop-up box for configuring the network settings is displayed with the
following items:
System name
Network Settings
Network
Bandwidth limit
IP address
Subnet mask
Default gateway
PPP address
System name
Each D4 on the network can be given a system name to help identification, the
unit name is displayed in the Network Viewing software. A maximum of 30
characters can be used for the system name. The default unit name is 'D4'.
Tip: If you do not want the unit to automatically identify itself on a network, use
a '#' symbol as the first character. You will still able to access the unit across the
network by typing in the IP address directly into the Network Viewing software.
Network
This option is used to enable or disable the network option. The network is
enabled by default.
D4
Enabled
Disabled
100%
1 – 100%
000.000.000.000
255.255.000.000
000.000.000.000
172.017.002.002