Event Setup; Status Page - Dedicated Micros D4 Guía De Programación

Event Setup

Auto event copy
Event Setup
Buzzer
Event partition

Status page

Auto event copy
Activity detection or alarm events can be automatically copied onto an external
Jaz® disk for reviewing at a later date.
Note: Iomega Jaz® disks may not be available in SCSI format in all countries.
Buzzer
The internal buzzer can be programmed to activate when an alarm, activity
detection, or a camera fail is detected. By default, the buzzer is deactivated.
Note: The camera fail buzzer will continue to activate until the failed camera is
reconnected or replaced. To deactivate the camera fail buzzer on the failed
camera, press and hold the corresponding camera key to enter the Camera Setup
menu and disconnect the camera video input.
Event partition
An event partition can be configured to protect events for longer than using just
the normal recording partition. When an event partition is configured, all events
will be saved to this area. The events are overwritten in a first in last out basis
when the partition is full.
To work out the required event partition size, use the following equation:
Event partition (GB) = Days x Image size (KB) x % Events x Event PPS
Off
Activity, Alarms, Both
None
Alarm, Activity, Camera Fail
Edit
On
Off
1111
Where;
Days = Number of days to record before events are overwritten.
Image size (KB) = The recorded image size in kilobytes.
% Events = The percentage of recordings which are events.
Event PPS = The record rate of event recording (PPS).
For example, If you want to keep events for 5 days before they are overwritten,
alarms are triggered for 25% of the time, image size is 18KB, and the Event PPS
is 6 pictures per second the equation would be:
Event partition (GB) = 5 x 18 x 25 x 6 = 12GB
1111
CAUTION: Specifying an event partition will reduce the disk space and hence
recording time for normal recording.
Status page
A status page giving details of alarms and camera failures can be displayed upon
entering the menus. To display this page select 'On'.
15