Evers FX-HV Serie Manual De Instrucciones página 23

4. MAINTENANCE
Before each Use:
• Check the condition and function of the sliding part and the locking pin AND the magnet according
to FX Operating Instructions
Weekly:
• Check the extension arm for deformation, crazing and wear
• Should the lifting eyes be visibly worn these must be replaced immediately
• Lubricate the sliding part and the locking pin
• Damaged and/or almost illegible nameplates must be replaced immediately
Yearly:
• A regular check shall be conducted by DGUV/BGR 500/Section 2.8 at least every 12 months. Depending
on the conditions of the Lifting magnet checks at shorter intervals may be necessary.
Always read the operating instructions for the FX lifting magnets!
22