Maintenance; Customer Responsibilities - Craftsman 919.195414 Manual De Instrucciones

CUSTOMER RESPONSIBILITIES

Check Safety Valve
Drain Tank
Oil Leaks
Check Pump Oil
Change Pump Oil
Unusual Noise and/
or Vibration
Air Filter
Drive Belt-Condition
Motor Pulley/Flywheel
alignment
Air compressor
pump intake and
exhaust valves
Inspect air lines and
fittings for leaks
Remove tank from
service
Head Bolts - Check the torques of the head bolts after the first five hours of operation.
1 - more frequent in dusty or humid conditions
- For more information, contact a Trained Service Technician.
2
cycles automatically when power
is on. When servicing, you may
be exposed to voltage sources,
compressed air, or moving parts.
Before servicing unit unplug or
disconnect electrical supply to
the air compressor, bleed tank
of pressure, and allow the air
compressor to cool.
To ensure efficient operation and lon-
ger life of the air compressor, a routine
maintenance schedule should be pre-
pared and followed. The above routine
maintenance schedule is geared to an
air compressor in a normal working
environment operating on a daily basis.
If necessary, the schedule should be

MAINTENANCE

•
•
•
Risk of Unsafe
Operation. Unit
•
•
•
•
modified to suit the conditions under
which your air compressor is used.
The modifications will depend upon
the hours of operation and the work-
ing environment. Compressors in an
extremely dirty and/or hostile environ-
ment will require a greater frequency of
all maintenance checks.
NOTE: See Operation section for the
location of controls.
TO CHECk SAFETY VALVE
does not work properly, over-
pressurization may occur, causing
air tank rupture or an explosion.
18- ENG
•
• (1)
•
•
Risk of Bursting.
If the safety valve
• (2)