ProMed AC-4000 Manual Del Usuario página 13

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
SAFETY INSTRUCTIONS
Attention !
Never open the front cover during operation.
Never cover the air outlet!
Pull the plug from the socket before installation, cleaning and inactivity.
Make sure that no liquids enter the interior of the housing. This will not only damage the product, there is also
a risk of fire.
Only place the product on plane surfaces.
Make sure that the lateral air inlets of the product are not covered or closed.
Close doors and windows to quickly and efficiently clean the air in that room.
The air purifier is only intended for cleaning the air of private rooms (e.g. living room, bedroom, storage
room or basement rooms). The user must comply with the operating parameters specified in this manual. The
device may only be used in accordance with its specifications. Any use going beyond these specifications is
regarded as improper use. The user/operator, and not the manufacturer, shall be liable for any damage or
injury resulting from the improper use of the device.
When using an application (app) for operating the unit, the user enters a contractual relationship with the app
provider; Promed shall not assume any guarantees or liability in the event damage caused by such use.
Note: Please be sure to wear a facemask and gloves when replacing the filter.
Attention !
The use of an air purifier does not release you from the obligation of observing
the general hygiene rules, maintaining a safety distance from other persons (social
distancing) and wearing a face mask, if applicable.
SPECIAL QUALITY FEATURES
High filter capacity
The 3-level pre-filter removes larger particles such as dust, hairs, dead skin flakes, etc. It can be cleaned
by means of a vacuum cleaner and clear water.
The HEPA filter H13 is a highly efficient particle filter and one of the most important filters in the air
purifier. It can effectively filter smoke, dust, hairs, fine dust particles (PM2.5) and other particles which are
hazardous to the human body. Particles of a size of 0.3 microns are filtered out with accuracy of 95 to
99.95%.
The carbon filter can effectively absorb organic substances, efficiently remove odour and eliminate
volatile organic compounds, such as formaldehyde, toluene, hydrogen sulphide, chlorobenzene and air
pollutants.
The photocatalytic filter can effectively remove toxic and harmful gases, such as formaldehyde, from
the air and efficiently clean the air; at the same time, it can effectively kill a multitude of bacteria and
viruses and break down the toxins released by bacteria or fungi.
UV disinfection
The UV disinfection lamp disinfects the photocatalytic filter and the area behind the filter unit through exposing
them to ultraviolet light and radiation.
Air quality sensor and air indicator display
Analysis of the room air quality and effective control of the device through precise particle measurement.
Timer function
Selectable operating period of 1 to 9 hours.
Anions
The ion generator generates 5 million anions/cm³ which improve the air quality and help ensure the user's
health.
13
DE
EN
FR
IT
ES
NL
RU
PL
SE
AR
Tabla de contenido
loading

Tabla de contenido