Young America SSC 1000 Instrucciones Para Ensamblar página 13

Steps to lower the mattress:

Remove the mattress from the crib.

Loosen the (4) bolts attaching the front
Base Rail. See Figure 15. Do not re-
move the bolts.

Remove the (4) bolts attaching the front
Crib Side. See Figure 16.

Gently spread the top of the Crib Ends to
allow the Locater Pins in the Crib Ends
to disengage the holes in the ends of the
Crib Side top rail. Lift up and remove
the Crib Side. See Figure 17.

Remove the (4) bolts attaching the Mat-
tress Platform and remove the platform
from the crib. See Figure 18.

Remove the platform brackets and place
in the lower position. See Figure 19.

Refer to Step 3 on Page 8 to reassemble
the crib.

Check and securely tighten all assembly
bolts with the provided wrench.
Figure 17.
Crib End
Locater Pin
Figure 18.
All manuals and user guides at all-guides.com
Lowering the Mattress Platform
Crib Side
Figure 15.
Figure 16.
Higher location
3/4" assembly bolt
Wrench
Mattress bracket
Figure 19.
13
Lower location