Braun C 20 S Manual Del Usuario página 11

Filling the water reservoir
Ö
Pull off the water reservoir
illustration.
Ü
Remove the cap by turning it as indicated.
á
Fill the reservoir with tap water only.
à
Replace the cap.
â
Re-insert the water reservoir until it snaps into place.
A full water reservoir will last for approx. 20 steam
shots.
Setting the temperature
(only with models C 70 TS, C 100 TS)
By means of the temperature control
choose a temperature setting from a range between
«min» and «max». Higher temperatures are suitable for
thick hair, lower temperatures for thin hair. When using
the shot of steam, we recommend setting the
temperature control at «max».
Switching on and off
1
To switch on the energy supply push switch
to position «1».
2
Wait 3–4 seconds.
3
To start the appliance, push switch
the «start» position until you can clearly hear a click.
4
Let the switch slide back to position «1».
5
After approx. 2–3 minutes, the ready indicator
turns dark. The appliance is now ready for use.
After use, always switch off (slide switch
position «0») and make sure the water reservoir is
empty.
$
as shown in the
you may
up
further up to
back to