Maintenance And Cleaning - Würth 0715 93 92 Instrucciones Para El Manejo

Advices for operation
• Inform yourself before inflating a tyre of the
correct tyre pressure and do not exceed this value.
• Inflate a tyre with the (+) button only in short
intervals and check the pressure increase between
the individual inflating steps on the manometer 20.
• Press the (–) Taste to reduce the tyre pressure.
• In addition, the general safety notes in the safety
notes section must be observed.

Maintenance and cleaning

• Before any work on the pressurised parts of the
tyre inflator, it is to be completely relieved of
pressure. Open the condensation drain screw 715
until air streams out. Wait until air no longer
streams out and close the screw again.
• Always keep the machine clean.
• For all inquiries and spare parts ordering, please
include the 8-digit article number of the unit.
• Check the filler valve 2 and the automatic filler 3
regularly for correct function and sealing.
• Drain the water from the unit at regular intervals.
For this purpose, place the unit on a level surface
and open the condensation drain screw 715 far
enough that water and air streams out. As soon as
only air streams out, the unit is drained of water
and the screw can be screwed in again.
0715_93_92_00219d_BAL_Reifendruckregler_Pneustar_12_2020.indd 7
Calibration
The relevant national regulations apply. In Germany,
measuring devices for checking tyre pressures must
be calibrated as per the calibration law.
The calibration is valid for two years from the end of
the calendar year in which the measuring device
was last calibrated. The responsibility for calibrating
lies with the person who uses or provides the device.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of
purchase through invoice or delivery note). Damage
that has occurred will be corrected either by
replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if the
device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
We reserve the right to make technical changes.
We accept no liability for printing errors.
Symbol nominal position
Device adjusted in horizontal position.
7
07.12.20 10:03