P O R T E R O D I G I TA L - D I G I TA L D O O R E N T R Y S Y S T E M S - P O R T I E R N U M É R I Q U E
Funcionamiento (Conserjería desactivada) - Operation (Concierge unit deactivated) - Fonctionnement (Conciergerie désactivée)
Configure the entrance panel of the external point of entry as the external panel (E) (See "Configuration of exterior entrance panel (E)", page
26). Configure the entrance panel of each building as the main panel (Leave the J1 jumper installed). The function activating the electric lock
from the entrance panels only remains enabled in the external point of entry.
SYSTEM ON STANDBY
The telephones are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a telephone is
lifted, an uninterrupted tone will be heard.
SYSTEM ACTIVE. MAKING A CALL
Only the telephone whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance
panel. If the handset of another telephone in the same building is picked up, intermittent tones will be heard. If the handset of the requested
telephone is off the hook or if the code does not correspond to any telephone, the panel will emit intermittent tones. When several telephones
are installed in the dwelling, all of them receive the call. The first telephone to be answered will establish communication with the the entrance
panel.
Time limit to answer the call: At the external point of entry; configurable (Position 7 from the configuration menu). In buildings inside the
estate; consult datasheet of the audio unit.
Time limit for conversation: At the external point of entry; configurable (Position 6 from the configuration menu). In buildings inside the
estate; consult datasheet of the audio unit.
During the answering and conversation periods, the panels of other buildingks remain on standby until a call is made. If the call is made from
the external point of entry, the panel display will show the code which has been entered. The entrance panel of the buildingk where the telephone
is located remains deactivated (blocked) The red indicator will blink.