FERNSTEUERUNG
REMOTE CONTROL
FUNKTIONEN/TRIMMUNG
FUNCTIONS/TRIM
Gas Trimmhebel
Startet der Motor selbsttätig, muss der Gas Trimmhebel nach unten gezo-
gen werden, bis der Motor stoppt. Kann der Motor mit dem Gasknüppel
nicht gestartet werden, muss der Trimmhebel nach vorne gedrückt werden
bis ein Start des Motors mit dem Gasknüppel möglich ist.
Throttle trim
If the main rotor starts spinning with the throttle stick at its lowest positi-
on, you have to move down the trim button until the main rotor does not
start to spin. Move the throttle trim up, if the main rotor does not start to
spin when you move the throttle stick.
Gier Trimmhebel
Sollte der LRP STAR CHOPPER 440 während des Schwebeflugs um die
Hochachse drehen (Gier rechts/links), kann dies mit dem Gier Trimmhebel
ausgeglichen werden. Dreht die Nase des Helikopters nach links, muss
am Trimmhebel nach rechts korrigiert werden. Dreht der Helikopter mit der
Nase nach rechts muss am Trimmhebel nach links korrigiert werden.
Rudder trim
If your LRP STAR CHOPPER 440 turns left or right around the vertical axis
during hovering, you can adjust this by moving the rudder trim. If the nose
of the helciopter turns left, you have to move the rudder trim button to the
right. If the nose of the helicopter turns right, you have to move the rudder
trim button to the left.
P . 8