Idiomas disponibles
Idiomas disponibles
STEP 5
At the inner Front Air Deflector hole locations, adhere the
abrasive resistant tape strips above the outer chrome
badge holes, as shown.
See FIGURE 5.
STEP 6
Install the center metal brackets over the outer studs on the
chrome badge and re-fit the chrome badge to the hood with
the previously removed nuts. Ensure correct orientation of
the center metal brackets, so that when fitted, the bracket
shape follows the contours of the hood, as shown.
See FIGURE 6.
STEP 7
Re-fit the Front Air Deflector and secure to the inner metal
clips with the screws and washers provided.
See FIGURE 7.
STEP 8
At the outer Front Air Deflector hole locations, locate the
metal wing clips over the abrasive resistant tape strips on
the hood lip.
IMPORTANT: Ensure the metal wing clips rest over the
tape strips and do not come into contact with the
hoods paintwork. Failure to do this may result in
permanent paint damage.
Finally, secure the Front Air Deflector to the metal wing
clips with the screws and washers provided.
See FIGURE 8.
5
6
7
8
Sup319
2/6
K6860448
82211329
TOP VIEW
