Tabla de contenido
GB
2.0
Safety instructions
Warning!
All Installation and maintenance work on the pressure vessel may only be carried out by
!
trained and experienced specialists.
Appropiate use!
The unit may only be used for its intended purpose. These units are intended exclusively
for the following purpose:
■ Separation of condensate, particles and oil mist from operating media of group 2 as
per Pressure Equipment Directive 2014/68/EU.
Moisture content of the compressed air:
Max. 50% relative humidity.
Any other form of use or one going beyond this shall be considered as inappropriate.
We shall have no liability whatsoever for any damage incurred as a result!
General safety hints!
■ You as operator/user of the unit should make yourself familiar with the function,
installation and start-up of the unit through these operating instructions. It is essential
that you follow these safety notes and this information in order to ensure trouble-free
operation of the unit.
■ The pressure vessel has been designed for a life of 10 years.
3.0
Installation, startup and operation
See pictures A1-E3 on pages 35 - 41
General installation instructions
■ Depressurize the system before carrying out any work on the pressure vessel.
■ Make a visual check! There must be no external damage visible.
■ Make a check for leaks!
■ Clean the piping before carrying out the installation work.
Startup and operation
Slowly apply pressure to the system by fi rst opening the downstream valve.
Make sure that no pressure peaks occur.
Pressure peaks within the system can damage the condensate drain and upstream
devices.
11
Tabla de contenido
