Options; Child Lock - Samsung WA45M3100A Serie Manual Del Usuario

Cycle
RINSE + SPIN
SELF CLEAN

Options

Child Lock

Child Lock disables the START/PAUSE button
while the washer is operating. This is to
prevent children from playing with the
washer.
Activating the Child Lock function
Press and hold the Temp. and Water Level
buttons simultaneously for approximately
3 seconds.
• Child Lock disables the START/PAUSE
button while the washer is operating.
• The Child Lock Indicator blinks.
Using the Child Lock function
If the lid is opened when the Child Lock
function is on, the Hot LED illuminates and
an alarm sounds.
• If the water level in the tub is above the
safe water level, the Hot light illuminates
on the LED display and the washing
machine starts to drain after 30 seconds.
If the water level in the tub is above
•
the safe water level and the Child Lock
function is turned on while the door
is open, the Hot, Cool, Extra High, and
Low lights illuminate on the LED display
even if the power is turned off and the
washing machine starts to drain.
WA3100M_DC68-03850A-02_EN.indd 33
Use for loads that need rinsing only or to add rinse-added
fabric softener to a load.
Use to clean dirt and bacteria from the tub. Regular use (after
every 20 washes) is recommended. No detergent or bleach is
needed.
•
•
•
•
•
Description
If the power is off and the lid is opened
while the water level in the tub is above
the Reset water level, the Hot, Cool,
Extra High, and Low lights illuminate
on the LED display and the washing
machine starts to drain. When the
draining operation finishes, the power is
automatically turned off again.
If you activate Child Lock while the
washing machine is running, the START/
PAUSE button will not work.
After the compulsory drain, the Hot,
Cool, Extra High, and Low lights blink
at 1 second intervals and the product
enters the Hot, Cool, Extra High, and
Low light mode. (When the product is
in the the Hot, Cool, Extra High, and
Low light mode, only the POWER button
works.)
To cancel the the Hot, Cool, Extra High,
and Low light mode, you need to turn
the power off and then on again.
To cancel the Hot light mode, deactivate
the Child Lock function. To deactivate
the Child Lock function, press and hold
the Temp. and Water Level buttons
simultaneously for at least 3 seconds.
English 33
2018-04-19 10:33:20