Cleaning, Care & Maintenance; Troubleshooting - Buffalo CP868 Manual De Instrucciones

Cleaning, Care & Maintenance
Switch off and disconnect the appliance from the power supply. Allow to cool
down before cleaning.
• Clean the interior of the appliance as often as possible.
• Do not use abrasive cleaning agents. These can leave harmful residues.
• For stains on the interior walls, wipe with a cloth damped with some mild soapy solution. Ensure no
moisture enters the inside of the cabinet.
• Always wipe dry after cleaning.
Cleaning the firestone
• Periodically remove the firestone from the oven for cleaning.
• Clean using warm, soapy water. Rinse thoroughly and dry well.
• Re-locate the firestone in place.
Note: Only clean the firestone after cooling down, or it may break.
Never use scouring pads or powers to avoid scratching the surface.

Troubleshooting

Fault
The unit is not The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Appliance heats up Bulb has expired
but indicator light
does not come on
Indicator light Faulty thermostat
comes on but
Faulty heating elements
appliance does not
heat up Thermostat set incorrectly
Appliance slow to Cooking surface not clean
heat up
Faulty heating elements
CP868_ML_A5_v2_20210204.indb 5 CP868_ML_A5_v2_20210204.indb 5
Probable Cause Solution
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Clean cooking surface
Call BUFFALO agent or qualified technician
UK
5
2021/2/5 10:42 2021/2/5 10:42