HJM T-150 Instrucciones De Uso página 16

Tostador T-150_Maquetación 1 01/03/16 09:46 Página 16
• It will remain down until the bread is toasted. The logo will be dis-
played on the bread.
• If you wish to stop the toasting process, press the Cancel button
(B). this will automatically eject the toast, and cancel the heating
elements.
• If the bread sticks in the toaster, unplug it, wait for it to cool, then
remove the bread. NEVER USE METAL UTENSILS TO REMOVE
THE BREAD.
• After use, wipe away crumbs using a dry cloth.
• Always allow at least 1 minute's cooling time between cycles if toas-
ter is being used more than once at a time.
• If the lead connecting the toaster to the power supply is damaged,
it should only be replaced by a qualified service engineer or the
toaster manufacturer.
• Always allow at least 1 minute's cooling time between cycles if toas-
ter is being used more than once at a time.
• Must put in the bread when using, the toaster can not be used
without bread.
• This toaster is only for home use.
CLEANING
CLEANING AND CARE INSTRUCTIONS–NOTE THE TOASTER
SHOULD BE ALLOWED TO COOL COMPLETELY BEFORE CLE-
ANING.
• Do not immerse in water.
• Unplug from the power outlet (mains).
• DO NOT use coarse or abrasive sponges/cloths or steel wool to
clean the toaster.
• Never spray or apply cleaner directly onto or into the toaster – cle-
aner should be applied to a soft cloth.
• The outside of the toaster should be wiped with a soft, damp cloth,
and polished with a soft, dry cloth.
• After cleaning, wait a few minutes for the toaster to dry completely
before use.
• An authorized service representative should perform any other ser-
vicing.
- 16 -
E
N
G
L
I
S
H