Generex CS141 Serie Manual De Inicio Rápido página 6

6. Connect CS141 with your
network
Connect the LAN port of your CS141 with the ac-
cording network node.
7. Login and check settings
Enter the IP address of your CS141 and log in
with current passwords.
The upper area should show OK.
At the UPS monitor, UPS operational state data
will be displayed.
The quick configuration is finished, the CS141 will
monitor and log your UPS.
8. Using the DHCP mode
For the DHCP mode, an internal DHCP server is
mandatory. In this operating mode, the CS141 will
query for a valid IP address. A local IP address
configuration is not necessary, but we recommend
to use the manual option:
If the DHCP server is not reachable, the CS141
will boot and start with a manually configured IP
address.
Furthermore, some options like RCCMD requires
a static IP address. The DHCP server may chan-
ge it dynamically.
How to activate the DHCP mode:
1. Put the sliding switch to the rightt position or set
DIP switch 2 to ON.
2. Connect the power supply or insert the slot card
into the according slot of the UPS
3. Connect the CS141 with your local network
The CS141 will start and boot with the IP address
provided by the local DHCP server. Access the
CS141 with the according IP address directly.
Do not forget to configure the UPS model and
for more information as well as the complete
CS141 user's guide, visit us on
Sliding switch to right
DIP-Switch 2 set to ON
EU: 230V AC / 12 V DC
US: 120V AC / 12V DC