Generex CS141 Serie Manual De Inicio Rápido página 2

8
3
5
2
7 6
COM-Port 1 Serial Interface to connect an UPS or another device with a original RS232 cable
COM-Port 2 Communication port to connect additional devices for for use with CS141 devices:
GSM Modem, temperature and humidity sensor, SENSORMANAGER_II, Fieldbus devices
(MODBUS RS232, Profibus, LONBus, etc.).
Available for CS141L, CS141SC, CS141MINI & CS141R_2 = RS232 Available at CS141LM &
CS141SCM =RS485 (not equipped CS141BL, CS141BSC)
LAN-Port Ethernet 10/100 Mbit Interface with integrated status LEDs
Green LED: General connection indicator
Yellow LED: network traffic indicator
DC– Input 12 V switching power adapter input - only available for external CS141 devices
AUX Additional Port for connection CON_R_AUX4 und BACS
Available for CS141L, CS141LM, CS141SC und CS141SCM devices
Status-LEDs
Unpacking and installing operating system during update procedure
Unpacking failure during update procedure
Booting / powering up
Connections lost to external devices (UPS, Sensors, etc.)
Normal operation state—connection to all devices is OK
Sliding switch Toggle different boot conditions
.
DIP Switch
Configuration mode with hard-coded IP address: The CS141 can only be
reached via the hard-coded IP - Address 10.10.10.10. The mode will be
activated after a reboot, choose between software reboot and cold start.
Automatic DHCP-mode - The CS141 will obtain an IP address via local
network infrastruction devices. Please check the MACAdress of the
CS141 to find the valid IP address at your DHCP server
Manual IP address mode - Please configure IP address data manually.
USB
CS141 SNMP / WEB / MODBUS MANAGER
1
4
CS141BL
CS141LM
CS141L
3
2
CS141BSC
CS141SCM
CS141SC
5
6
7
/ :
/
CS141MINI
3
6
2
Red LED blinks
Red LED blinks fast
Red LED is on
Red and green
LED static on
Green LED blinks
:
:
Version: 2019-07-11
CS141R_2
7