Symbol QRG LS 2100 Serie Manual De Instrucciones página 4

L S
Scanning with the LS 21xx
Before you can use the scanner, it should have already been installed
and programmed. If not, consult the appropriate LS 21xx Product
Reference Guide for your specific scanner. If you need assistance,
contact your local supplier or Symbol Technologies.
1. Before you use the scanner, make sure all cable connections
are secure.
2. Aim the scanner away from you. Press the trigger; the scan
beam lights and an orange light illuminates at the rear of the
scanner.
3. Make sure the bar code is in the correct scanning range. Aim
and press the trigger. The scanner has read the symbol when:
- You hear a beep.
- The orange light turns green.
- The red laser turns off.
2 1 0 0
2
S e r i e s