Set Up Before Use; How To Use; Stand-By State - UFESA TotalChef RK3 Manual De Instrucciones

Thoroughly clean the parts that will come into contact
with food before you use the appliance for the first time.
Always put the main appliance on a flat, dry and clean
surface.
Never let the appliance run unattended.
The Spatula is only used for moving the food out of the
bowl. Don't use it while the blade is running.
When processing hot food (for temperature above
60°C) don't touch the filler cup.
Unplug the product immediately from the mains in the event of any breakdown or damage and contact
an official technical support service. In order to prevent any risk of danger, do not open the device. Only
qualified technical personnel from the brand´s Official technical support service may carry out repairs or
procedures on the device.
B&B TRENDS SL. disclaims all liability for damages that may occur to people, animals or objects, for
the non-observance of these warnings.
INSTALLATION
The bowl
The Maximum capacity of the bowl is 3.5 liters. Don't process the food more than 2.3 liters!
Caution
"Hot surface" logo marked on the bowl:
To indicate that the marked item can be hot and should not be touched without taking care!
Set up before use
Place the drive shaft correctly locked into the jug (See figure D). Insert the jug into the main unit and
press down firmly to lock into its place (See figure E).
Choose different accessories for different cooking purpose (See figure F), add the ingredients or water to
the jug (see figure G) and attach the blend lid (See figure H).

HOW TO USE

Stand-by state:
Plug the power cord into the main base and switch on (See figure I).
The rotary knob (12) can be used to setting temperature, time, speed or select different program. Press
the knob and the cooker will suspend cooking. It will continue cooking if your press again. Long push
the knob and the cooker will stop cooking. Press the knob after finish all setting and the cooking will
start cooking. It will automatically cancel if you long push the knob during setting. When finish cooking,
the display panel will shows "end". Press the knob and the cooker will into stand-by mode. When finish
weighting, hold the button for a seconds and will exit the weight program.
EN
31