Led Indicators - Axis Q60-E Serie Manual Del Usuario

AXIS Q60-E Series
Specifications

LED Indicators

Status LED
Unlit
Green
Amber
Amber/Red
Red
Buttons
Control Button
For location of the control button, see Hardware Overview on page 9.
The control button is used for:
• Resetting the product to factory default settings. See page 16.
• Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS
Service. For more information about these services, see the User Manual.
Power Button
Press and hold the power button to temporarily power the product when the dome cover is
removed. The power button is also used with the control button to reset the camera to factory
default settings. See page 16.
Connectors
Network Connector
RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE).
NO NO TICE NO TICE TICE
Use the supplied midspan.
www.a1securitycameras.com email: [email protected]
Indication
Connection and normal operation.
Shows steady green for 10 seconds for normal operation after
startup completed.
Steady during startup. Flashes during firmware upgrade.
Flashes amber/red if network connection is unavailable or lost.
Flashes red for firmware upgrade failure.
Available from A1 Security Cameras
18