Termozeta CLASSIC 60 VIAGGIO Libro De Instrucciones página 17

OPERATION
• Set the voltage selector (11) of the iron to domestic
mains voltage in your home (Fig. D).
• Rest the iron on the support provided (12),
completely unwind the power cable (9) and connect
the plug to the power outlet.
• With the adjustment knob (5) select the suitable
temperature for the type of fabric (see Table 1 - Fig. B).
• The thermostat lamp (8) turns on and will turn off when the sole plate reaches the selected temperature.
At this point, the iron is ready for use.
Important:
• Never leave the iron unattended and plugged into the outlet.
• The iron must be used and rested on a stable surface.
• Do not use the iron if it has been dropped accidentally or if there are any
visible damage or leaks.
• The travel iron is not designed for regular use but only brief ironing.
Tips:
• Before you start ironing, pass the iron over a small non-visible area of your piece of garment to make
sure that the selected temperature is suitable for the type of fabric.
• During ironing, pump the steam button (4) to get a jet of steam.
Note:
• Do not press the button (4) too many times consecutively to avoid spraying non-vaporized water
droplets.
• Only dispense steam when the knob (5) is positioned at the symbols ••• MAX.
• Water droplets may come out with the steam at first use. This is normal. Before ironing your garment,
perform tests on an old fabric.
• At every first, scale particles could come out with the steam so we recommend that you not spray
the first jets of steam directly on the garment to be ironed.
ENGLISH
D
230
D
115