Idiomas disponibles
Idiomas disponibles
SIARR
01 - 91
PREPARATION
* Remove the gravel flap located under the bumper.
* Remove the terminal nut from the top of the exhaust
pipe and make a cut as per sketch no.2.
ASSEMBLY
* Under the longitudinals, at the points marked X, fasten, without
tightening, arms A and B, using fastening kits X.
* Fasten arms A and B to the points marked U using fastening kit U.
* Fasten the tow bar body C to the points marked W using fastening kit W.
* Fasten the head E to the two bar body C at the points marked Y
using fastening kit Y.
* Fasten the tow ball D to the points marked Z using fastening kit Z.
FINISHING
* Tighten all of the nuts, bolts and screws to the torques indicated below.
* On the gravel flap, trace, then cut out the holes as per scetch no.1.
* Refit the gravel flap.
FASTENING KIT
4 off HM10x30 screws
W
4 off CS10 washers
4 off HM10x35 screws
X
4 off 10/25 plain washers
4 off CS10 washers
2 off HM10x35 screws
U
2 off 10/27 plain washers
2 off CS10 washers
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 washers
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
!
2 off HM12x90 screws
Y
2 off HM12 nuts
2 off CS12 washers
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM0191-C - FOLIO NDMANG
Affix the sticker in the position
!
indicated
NB :
Connecting a universal wiring kit ref.8526 is absolutely impossible on the vehicle (may
cause damage).
It is essential to use either a dedicated wiring kit or a relay box ref.8530.
Type
Type
Approval No.
Tow bar for
Citroën C5 Ph.2
e11*94/20*00*5576
(Standard)
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
Cut-out for
tow ball
Cut-out for
electrical plug
support
Max. Total
Max. Total
Authori. Weight Towable Weight
2 010 kg
1 800 kg
304113600001
Sketch n°1
Cut-out for
right arm
Sketch n°2
Max. Verti-
Value
cal load
D
75 kg
9,32 kN
