Restoring Default Settings; Bluetooth Connection - Teac UD-701N Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Clock sync

The CLOCK indicator does not stop blinking.

e Set clock synchronization to OFF when not using it.

e A clock signal to which the unit cannot synchronize might be

being input. Check the connections of the clock sync connectors

and the settings of the connected device.

Connections with a computer

Computer does not recognize this unit.

e See page 26 for information about supported operating

systems. Operation with unsupported operating systems is not

guaranteed.

Noise occurs.

e Starting other applications during playback of an audio file

may interrupt playback or cause noise. Do not start other

applications during playback.

e When the unit is connected to a computer via a USB hub, for

example, noise might be heard. If this occurs, connect the

unit directly to the computer.

Audio files cannot be played back.

e Connect this unit to the computer, and set this unit's input to

USB before launching audio playback software.

If you connect this unit to the computer or set its input to USB

after launching audio playback software, audio files might not

play back properly.

Playback stopped working.

e Check the audio output device setting of the operating sys-

tem. Try deleting the driver and reinstalling it. For details, see

the TEAC ASIO USB DRIVER Installation Guide included with

the driver.

Bluetooth connection

Cannot show device name.

e This unit does not support the display of symbols or double-

byte characters, including Japanese and Chinese.

Use only English letters and numbers for the names of

Bluetooth devices connected to this unit.

Cannot change connected Bluetooth device.

e This unit cannot have Bluetooth connections to multiple

Bluetooth devices at the same time.

To change the device connected with this unit by Bluetooth,

end the connection with the currently connected Bluetooth

device before connecting to another Bluetooth device.

Sound is not output, or the volume is low.

e Confirm that the volume is turned up on the other Bluetooth

device. If you do not turn up the volume on the playback

device, no sound might be output from this unit.

Since this unit uses a microcontroller, external noise and other inter-

ference can cause the unit to malfunction. If this occurs, unplug the

power cord, wait for a while, and then turn the unit on again and

restart operations.