Wash Options - Hotpoint LSP 733 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61

Wash options*

The OPTIONS may only be set, modified or reset
after the wash cycle has been selected and before
the Start/Pause button has been pressed.
Only the options which are compatible with the type of
wash cycle set may be selected. If an option is not com-
patible with the selected was cycle (see Table of wash
cycles), the corresponding LED flashes rapidly 3 times.
If an option is selected which is incompatible with an-
other option or wash cycle selected previously, the in-
compatible option light will flash 3 times and switches
off, while the most recently selected setting remains lit.
To deselect an option which has been set by mis-
take, press the corresponding button again.
It is possible to delay the start time of the wash cycle by
3, 6 or 9 hours.
After selecting the desired wash cycle and any other
options, select Delayed Start by pressing the
Delayed Start button repeatedly; the washing (3
hours), drying (6 hours) and end (9 hours) indicator
lights will flash in succession.
If the Delayed Start button is pressed again, the
option is deselected.
After the selection process, the countdown will begin
if the Start/Pause button is pressed. The selected
delay period indicator light flashes and the Start/
Pause button stops flashing (fixed light).
When the time has elapsed, the indicator light
corresponding to the selected delay period stops
flashing (fixed light) and the wash cycle begins.
The Delayed Start function cannot be set once
the wash has already started.
Table of options
Delayed
1. Auto Super wash
2. Auto Normal
3. Daily 60'
4. Soak
5. Eco
6. Speed 25'
7. Crystal
A
B
C
Half
Tabs
Start
Load
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the wash cycle and press the HALF
LOAD button: the indicator light will illuminate and the
wash cycle will take place only in the upper rack.
Remember to load the upper rack only, and to
reduce the amount of detergent accordingly.
It is better to use powder detergent in this case.
This option is not compatible with the following
wash cycle: Speed.
The MULTI-FUNCTIONAL TABLETS option remains
set for subsequent wash cycles if it is not deselected.
The use of tablets is only recommended for
models which offer the MULTI-FUNCTIONAL TABLETS
option.
This option is not recommended for use with wash
cycles which do not specify the use of multi-functional
tablets
see Table of options
This option is incompatible with the following wash
cycle: Soak.
*
*
19
EN
Tabla de contenido
loading

Este manual también es adecuado para:

Lsp 733a x

Tabla de contenido