Technical Specifications; Prior To First Use - Redmond RI-C222-E Manual Del Usuario

• Any modifications or adjustments to the product are not allowed. All
the repairs should be carried out by an authorized service centre.
Failure to do so may result in device and property damage or injury.
CAUTION! Do not use the appliance in case any breakdown
has been noticed.

Technical Specifications

Model............................................................................................................................................ RI-C222-E
Voltage ..................................................................................................................... 220-240 V, 50/60 Hz
Power ......................................................................................................................................2000-2400 W
Adjustable steam output ............................................................................................... up to 25 g/min
Overheat protection ...............................................................................................................................yes
Anti-calc feature ......................................................................................................................................yes
Anti-drip feature .....................................................................................................................................yes
Vertical steam ..........................................................................................................................................yes
Steam Shot ...............................................................................................................................................yes
Self-clean feature ...................................................................................................................................yes
Auto shut-off feature .............................................................................................................................yes
Dry ironing ................................................................................................................................................yes
Control ....................................................................................................................................... mechanical
Soleplate coating ........................................................................................................................... ceramic
Power cord length.............................................................................................................................. 1.8 m
Package Includes
Iron ........................................................................................................................................................... 1 pc.
Measuring cup ...................................................................................................................................... 1 pc.
User manual .......................................................................................................................................... 1 pc.
Service booklet ..................................................................................................................................... 1 pc.
The manufacturer reserves the right to make any modifications to design, packaging, or technical
specifications of the product without prior notice.
Iron parts A1
1. Water spray.
2. Water tank cap.
3. Steam output control dial enables to adjust steam output (depending on fabric), or to
disable steam feature.
4. Steam Shot button is used to release a powerful burst of steam during steam ironing
and vertical steaming.
5. Water spray button is used to dampen hard-to-iron fabrics.
6. Auto shut-off indicator starts flashing after iron is left unattended for 8 minutes in
vertical position, for 30 seconds in horizontal position (preceded by an audible signal).
7. Swivel power cord prolongs service life and ensures safety and comfort of use.
4
8. Power cord.
9. Heating indicator lights up to indicate that iron is heating and goes out to indicate
that selected temperature has been reached.
10. Extra-large 350 ml water tank.
11. Temperature control dial.
12. Self-clean feature "Calc Clean" is used to reduce lime scale build-up and improve
efficiency of your iron.
13. Water tank "Max" fill line (in vertical position).
14. Ceramic coating and carefully crafted design of the soleplate ensure even steam
distribution across the entire soleplate.
15. Measuring cup.
I. PRIOR TO FIRST USE
Carefully take the appliance and its detachable parts out of the package. Remove all wrap-
ping material and stickers except for serial number identification sticker.
No serial number identification sticker on the appliance automatically disables the user's
right to aftersales service.
Wipe the base of the appliance with a damp cloth, then let dry. You may notice foreign smell
when first using the appliance, this does not mean its malfunction.
After the appliance transportation or storage at low temperature keep it at room temperature for
at least two hours before plugging in.
II. OPERATING THE IRON
To fill water tank
1. Ensure that the iron is unplugged from the electrical outlet. Turn the temperature
control dial into "Min" position and the steam output control dial into
2. Open the water tank cap and tilt the iron. Using the measuring cup fill the tank below
the "Max" fill line on the housing. Close the water tank.
3. Position the iron vertically.
CAUTION! Do not fill directly from the faucet to prevent water from entering the appliance or
spilling on the power cord.
Use tap water to fill the water tank. Do not fill the tank with distilled (demineralized), softened,
or boiled water to prevent damage and prolong service life of the appliance.
If you have exceptionally hard water in your area use half distilled water and half tap water.
To select the temperature
The REDMOND RI-C222-E Steam Iron is equipped with a temperature control dial. The dial
is provided with standard symbols of temperature modes and the names of fabrics.
Turn the temperature control dial to align the name of fabric with the cursor on the housing (refer to "Fabric
Ironing Chart"). The heating indicator on the housing will light up to indicate heating. Once the soleplate
reaches the required temperature the heating indicator will go out, indicating that the iron is ready to use.
position.