Mopar 82212695 Manual De Instrucciones página 5

23. Connect the fog lamp harness connector (2) to the fog
lamp jumper connector (1).
24. Remove both fascia/fog lamp filler bezels and discard.
25. Route the fog lamp harness (1) between the engine
and cooling fan, and position the fog lamp connectors
through the fascia for connecting the fog lamps.
NOTE: Make sure the fog lamp harness (1) cannot con­
tact the fan or engine using tie straps.
26. Using tie straps, secure the fog lamp harness (1) to
the vehicle wiring harness as necessary.
NOTE: The fog lamp adjustment wheel (4) is used to
adjust fog lamps through the slot in the bottom of the
fascia/bumper.
27. Attach the connector to the LH fog lamp (1), position
and press the fog lamp (1) firmly to seat all three fog
lamp push­in retainers (2) into the fascia receiving
holes (3). Repeat for the RH fog lamp.
Jan 17, 2011
www.mopar.com
5
K6861209