Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Purpose and contents of the manual
The purpose of this Manual is to provide the operator with all necessary information to use the machine in the most
suitable, independent and safest way possible. It includes information on safety, technical aspect, operation, machine
stop, maintenance, spare parts and machine scrapping.
Before performing any operation on the machine, the operators and qualifi ed technicians must carefully read the
instructions in this manual. If in doubt on correct interpretation of the instructions, contact the NSS Manufacturer for
any explanations.
Recipients
This manual is for both the machine operator and qualifi ed maintenance technicians.
The operators must not perform operations reserved for qualifi ed technicians. NSS is not liable for damages resulting
from failure to observe this prohibition.
Manual storage
This manual must be stored next to the machine, in the special bag, protected from liquids and anything else that may
jeopardise readability.
Declaration of conformity
The declaration of conformity supplied with the machine certifi es compliance of the machine with the provisions of
law in force.
NOTE:
The original CE declaration of conformity is included in the documentation attached to the machine.
Identifi cation data
The machine serial number, model and year of manufacture are shown on label (A) affi xed to the frame. This informa-
tion is required when ordering spare parts or contacting the authorised service for assistance after a careful analysis
of the failures and their causes.
The following information must be provided when calling the service support:
•
Operating hours
•
Machine serial number
•
Failure details
•
Checks performed
•
Adjustments performed and their eff ect
•
Alarms displayed (in the event of electronic management)
•
Any incorrect usage
•
Any other relevant information
INTRODUCTION
A
5
Capítulos
Tabla de contenido
