Pushing/Towing The Machine - NSS CHAMP 2417 RB Manual De Uso

When the drive unit cannot be used (no batteries, fl at batteries, faults, etc.), the electromagnetic brake must be re-
leased as follows to push/tow the machine:
• Turn lever (A1) "CLOCKWISE" as shown in the fi gure.
Never exceed a speed of 3 Km/h during manual pushing/towing.
• Once this operation is complete, turn lever (A1) "ANTI-CLOCKWISE" to reengage the electromagnetic brake and
restore the machine in safety conditions.
!
ATTENTION!
After manually moving the machine and with the electromagnetic brake (A) engaged again, push the machine
to check that the brake is actually enabled and properly functioning.
!
ATTENTION!
Never turn the machine on with lever (A1) in released electromagnetic brake position. Release the electro-
magnetic brake only for the time required to manually push or tow the machine.

PUSHING/TOWING THE MACHINE

A1
17
A