Temperature Alert; Screen Saver; Manual Setting - Angelcare AC315 Manual Del Usuario

6.4 - SCREEN SAVER

02:04 68°F
02:04
02:04 68°F
00:00:30 00:01:00
4

MANUAL SETTING:

To manually activate the Screen Saver Mode, quickly press & release the Parent Unit POWER ON/OFF button.
NOTE:
The LCD screen will turn black when video is in Screen Saver mode. Press any button to return to Video
mode.
6.5 - MOVEMENT AND TEMPERATURE MONITORING
Activity analysis and room temperature tracking give you insight into your little one's activity level during sleep,
helping you to better adapt routines and respond to their needs. The movement monitoring records data every ten
seconds. Three times every hour the system compiles the collected data and a "movement activity report" can be
viewed on the Parent Unit.
TO ACTIVATE OR DEACTIVATE MOVEMENT AND TEMPERATURE MONITORING:
IMPORTANT
In order to record the movement and temperature data, ensure you have set the date and time in STEPS 4.1
and 4.2.
The graphing function is not available during the first 20 minutes of use as the system is collecting the first set
of data that will be displayed. During this time, the graphing icon
16

TEMPERATURE ALERT

•
•
•
1) In the general settings menu, select the screen saver
settings menu.
2) Press
3) Press the down arrow
the screen saver will be activated.
00:02:00 00:03:00
4) Press the down arrow
highlighted in blue then Press the
Alert activates when temperature reaches maximum or minimum set
temperature.
Parent Unit will emit 4 consecutive beeps, every 5 seconds.
Temperature Alert icon will show on LCD screen.
to switch the screen saver ON or OFF.
once and then
Select between 30 seconds
to 3 minutes.
, the Save icon at the bottom is
will not be operational.
to set the time after
button to save the settings.