Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Step 4
4. Insert 6 wood dowels (CC) into pre-drilled
holes in edge of top and bottom trim on both
left and right assemblies. Slip front panel (C)
behind top trim on front pilasters and over
wood dowels (CC) as illustrated until it rests
snugly on lower trim. Insert 2 bolts (AA) through
flat washers (BB), through pre-drilled holes in
back left side of front panel (C), and into pre-
drilled holes in left assembly. Tighten with
screwdriver.
Insert 2 bolts (AA) through flat washers (BB),
through pre-drilled holes in back right side of
front panel (C), and into pre-drilled holes in
right assembly. Tighten with screwdriver.
Step 5
5. Set top panel (A) over assembly aligned with
pre-drilled holes along top edge of assembly.
From underneath top panel (A), insert flat
washers (BB) and bolts (AA) in pre-drilled holes
along top edge of assembly as shown. Tighten
with screwdriver.
3
Tabla de contenido
