Introduction; Device Description; Scope Of Delivery; Intended Use - Scheppach SG2500i Manual Del Usuario

1.

Introduction

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope you have a lot of fun and success using your
new machine.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• improper handling,
• noncompliance of the operating instructions,
• repairs by third parties, not by authorized service
technicians,
• installation and replacement of non-original spare
parts,
• non-intended use,
We recommend:
That you read through the entire operating instructions
before putting the machine into operation.
These operating instructions are to assist you in get-
ting to know your machine and utilize its proper appli-
cations.
The operating instructions contain important notes on
how you work with the machine safely, expertly, and
economically, and how you can avoid hazards, save re-
pair costs, reduce downtime and increase the reliability
and service life of the machine.
In addition to the safety requirements contained in
these operating instructions, you must be careful to ob-
serve your country's applicable regulations.
The operating instructions must always be near the
machine. Put them in a plastic folder to protect them
from dirt and humidity. They must be read by every op-
erator before beginning work and observed conscien-
tiously. Only persons who have been trained in the use
of the machine and have been informed of the various
dangers may work with the machine. The required min-
imum age must be observed.
In addition to the safety requirements in these oper-
ating instructions and your country's applicable regu-
lations, you should observe the generally recognized
technical rules concerning the operation of identically
constructed devices.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 3)
1. Carrying handle
2. Fuel tank cap with ventilation
3. On / Off switch with choke
4. Starter pull cord
5. Engine cover
6. Spark plug cover
7. Earthing connection
8. Energy saving switch
9. 230 V ~ - socket outlets (2x)
10. USB - port (2x)
11. Oil warning display
12. Overload display
13. Operating display
A Oil filler plug
B Air filter cover
C Air filter
D Spark plug

3. Scope of delivery

a. SG2500i
b. manual
c. spark plug wrench
d. funnel

4. Intended use

The device is designed for applications operated with a
230 V alternating current source.
Be sure to observe the restrictions in the safety
instructions.
The generator is intended to provide electric power
tools and light sources with electricity. When using the
device with household appliances, please check their
suitability in accordance with the relevant manufactur-
er's instructions.
www.scheppach.com GB | 21