Installing Rails - Leer PACE EDWARDS ULTRAGROOVE ELECTRIC Instrucciones De Instalación

HARDWARE
USED
HARDWARE
:
USED:
1/4 -20 X 5/8" Rail
Screw x2
HARDWARE
USED
:
1/4" Lock
Washer x2
1/4 -20 X 5/8" Rail
Screw x2
1/4" Flat
Washer x2
1/4" Lock
Washer x2
1/4" Flat
Washer x2
Hook Rail
feature
into Rail Guide
6
STEP 4: INSTALLING RAILS
• Remove the protective paper from the foam on the underside of the Rail flanges.
This is for packaging purposes only.
Tailgate End
• Next identify the left and right side rails (FIG 4A). The rail flange and foam towards the
outside of the truck bed.
HARDWARE
USED
:
Tailgate End
1/4 -20 X 5/8" Rail
Screw x2
1/4" Lock
• First, make sure that the Lead Rib Flange is in pulled toward the tailgate enough to
Washer x2
clear the Canister Flange
Lead Rib
and Canister Stop (FIG 4B). Flange
Canister
Flange
Figure 4B shows that
the lead rib needs to be 1/4" Flat
Washer x2
Canister
pulled out toward the
Stop
Lead Rib
tail gate. Now hook the
Flange
rail into the rail guide
FIG. 5B
and roll it down making
Canister
sure to not get the
Flange
sweep seal folded
back into the rail
Canister
(FIG 4C).
Stop
FIG. 4B
FIG. 4B
Sweep Seal
here
Left Rail
Right Rail
Left Rail
Tailgate End
Right Rail
Pull Out
FIG. 4A
Pull Out
Lead Rib
Flange
FIG. 4B
Canister
Flange
Canister
Stop
FIG. 4B
FIG. 4B
Lead Rib Notch
FIG. 4C
Cab End
Left Rail
FIG. 5A
Right Rail
Cab End
FIG. 4A
Pull Out
Cab