Mellerware SMARTVAC Manual De Instrucciones página 2

Dear customer,
Thank you for choosing to purchase a Mellerware
brand product. Thanks to its technology, design and
operation and the fact that it exceeds the strictest qual-
ity standards, a fully satisfactory use and long product
life can be assured.
6
7
8
9
1. Parts description
1. Charging Base
2. Handle
3. ON/OFF Switch
4. Dust container release button
5. Filter assembly
6. Dust container
7. Crevice tool
8. Water suction tool
9. Soft brush
2. Safety advice and warnings!
Read these instructions carefully before switching
on the appliance and keep them for future reference.
Failure to follow and observe these instructions could
lead to an accident. Clean all the parts of the product
as indicated in the cleaning section, before use.
2.1. Use or working environment:
2.1.1. This appliance is designed solely for domestic
use and for the designated purpose.
2.1.2. Do not use the appliance outdoors (unless it has
been specifically designed for outdoor use)
2.1.3. Use the appliance in a well ventilated area.
2.1.4. Do not subject the appliance to heat, direct
sunshine or moisture (e.g. Rain)
31350_IM.indd 2
1
2
3
4
5
2.1.5. Never immerse the appliance in liquids and be
aware of sharp edges that may damage it.
2.1.6. Although this product is designed to suck up
water, never use it with wet or damp hands.
2.1.7. The appliance is designed to vacuum up materi-
als that are not hazardous to your health and that are
not flammable.
2.1.8. Never hold the connectors in front of your face
(especially your eyes, ears, etc) Never direct the nozzle
towards persons or animals.
2.1.9. Keep children and bystanders away when using
this appliance.
2.1.10. Do not vacuum up ash, hot coals, large frag-
ments of glass and sharp objects.
2.1.11. Do not vacuum up any toner dust, which is
used in printers and copies for example, because it is
electrically conductive. In addition, it is possible that it
will not be completely filtered out by the filter system of
the vacuum cleaner and can be released in the air via
the exhaust fan.
2.1.12. Do not place flammable material near the ap-
pliance.
2.1.13. Do not use the appliance in association with a
programmer, timer or other device that automatically
switches it on.
2.1.14. Do not use the appliance if the charger cable or
plug is damaged.
2.1.15. Ensure that the voltage indicated on the rating
label matches the mains power supply voltage before
plugging in the appliance.
2.1.16. The appliance's plug must fit into the mains
power supply socket properly. Do not alter the plug.
2.1.17. If using a multi plug check ratings carefully as
the current used by several appliances could easily
exceed the rating of the multi plug.
2.1.18. If any of the appliance casings breaks, imme-
diately disconnect the appliance from the mains power
supply to prevent the possibility of an electric shock. (If
applicable)
2.1.19. Do not use the appliance if it has fallen on the
floor or if there are visible signs of damage.
2.1.20. Do not wrap the charger power cord around
the appliance; use the power cord storage instead. (if
applicable)
2.1.21. Do not clip or crease the charger power cord.
2.1.22. Do not allow the charger power cord to hang or
to come into contact with the hot surfaces.
2.1.23. Check the state of the charger power cord.
Damaged or tangled cables increase the risk of electric
shock.
2.1.24. The appliance is not suitable for outdoor use.
2.1.25. Charger power cord should be regularly exam-
5/31/2017 10:04:03 AM