Programming Personal Data - Mellerware BODYMAX Manual De Instrucciones

3.2. Normal weighing system:
3.2.1. Gently press the surface of the scale with your
foot to switch it on and wait for the screen to show
"8888", then wait until "0,0" appears on the screen.
3.2.2. Place yourself in the centre of the platform
avoiding abrupt movements and without touching
other objects, until the appliance shows your weight.
3.3. To measure Water, Bone and Muscle you need
to enter your personal settings.
3.3.1. Gently press the surface of the scale with your
foot to switch it on.
3.3.2. Press the Set button and use Up/down button
to find the memory number under which you wish
to save your personal data (9 memories available
P01-P9). Then press the Set button to confirm your
choice.
3.3.3. Select male or female by using up/down but-
tons and confirming by pressing Set button.
3.3.4. Log in your age using the up/down buttons and
confirming by using Set button.
3.3.5. Log in your height using the up/down buttons
and confirming by using Set button. Note you can
also use the unit selector button under the scale to
select height measure ( Inches "/Centimetre CM).
These steps can be repeated to program the remain-
ing 9 memories if desired.
3.3.6. Once you have set your profile, press the "set"
button and select your profile. Your saved data will
briefly flash onto the screen of the scale.
3.3.7. Place down the scale and place your body at
the centre on top of the metal sensors. Remember to
be bare feet.
3.3.8. Remain still on the scale while the scale is
calculating. The scale will show flashing "000" while
busy calculating. Once done, the scale will flash
results in the following sequence:
3.3.9. Body Fat %, Body Water % (Hydration), Bone
% and Muscle %. See below the icons displayed on
the scale. The results will repeatedly flash 3 times
and then the scale will switch off.

3.4. Programming personal data:

3.4.1. Gently press the surface of the scale with your
foot to switch it on.
3.4.2. Press the Set button and use Up/down button
to find the memory number under which you wish to
save your personal data (9 memories available). Then
press the Set button to confirm your choice.
3.4.3. Select the weight unit using the Up/buttons
and confirming the chosen option by pressing the Set
button.
3.4.4. Select male or female by using up/down but-
tons and confirming by pressing Sett button.
3.4.5. Log in your age using the up/down buttons and
confirming by using Set button.
3.4.6. Log in your height using the up/down buttons
and confirming by using Set button. These steps can
be repeated to program the remaining 8 memories if
desired. These steps can be repeated to program the
remaining 8 memories if desired.
3.4.7. Once you have set your profile, press the "set"
button and select your profile. Your saved data will
briefly flash onto the screen of the scale.
3.4.8. Place down the scale and place your body at
the centre on top of the metal sensors. Remember to
be bare feet.
3.4.9. Remain still on the scale while the scale is
calculating. The scale will show flashing "000" while
busy calculating. Once done, the scale will flash
results in the following sequence:
3.4.10. Body Fat %, Body Water % (Hydration), Bone
% and Muscle %. See below the icons displayed on
the scale. The results will repeatedly flash 3 times
and then the scale will switch off.
1
2
3
4
Left icons
1. Body Fat %
2. Water/Hydration %
3. Bone %
4. Muscle %
Please note, the scale will also use one of the follow-
ing descriptions as per the results:
1. Under fat
2. Healthy
3. Over fat
4. Obese