Mellerware TRENTO Manual De Instrucciones página 2

Dear customer,
Thank you for choosing to purchase a Mellerware
brand product. Thanks to its technology, design and
operation and the fact that it exceeds the strictest
quality standards, a fully satisfactory use and long
product life can be assured.
1
3
9
10
11
12
13
14
1. Parts description
1. Water tank lid
2. Hot plate for warming cups
3. Water tank
4. Filter holder
5. Drip tray
6. Measuring spoon
7. Single filter holder
8. Double filter holder
9. Heating pilot light
10. Steam heating switch
11. Coffee outlet/water outlet switch
12. On/Off switch
13. Power pilot light
14. Tray grill
15. Steam knob
16. Steamer pipe
2
7
8
4
6
5
15
16
2. Safety advice and warnings!
Read these instructions carefully before switching
on the appliance and keep them for future reference.
Failure to follow and observe these instructions could
lead to an accident. Clean all the parts of the product
that will be in contact with food, as indicated in the
cleaning section, before use.
WARNING: THIS APPLIANCE HEATS UP DURING
USE, BE AWARE OF HOT SURFACES.
WARNING: THE CUP WARMER WILL HEAT UP DUR-
ING USE, DO NOT TOUCH IT.
2.1. Use or working environment:
2.1.1. Keep the working area clean and well lit. Clut-
tered and dark areas invite accidents.
2.1.2. Use the appliance in a well ventilated area.
2.1.3. Do not place the appliance on hot surfaces,
such as cooking plates, gas burners, ovens or similar
items.
2.1.4. Keep children and bystanders away when us-
ing this appliance.
2.1.5. Place the appliance on a horizontal, flat, stable
surface suitable for withstanding high temperatures
and away from other heat sources and contact with
water.
2.1.6. Keep the appliance away from flammable
material such as textiles, curtains, cardboard or
paper, etc.
2.1.7. Do not place flammable material near the ap-
pliance.
2.1.8. Do not use the appliance in association with a
programmer, timer or other device that automatically
switches it on.
2.1.9. Do not use the appliance if the cable or plug is
damaged.
2.1.10. Ensure that the voltage indicated on the rating
label matches the mains power supply voltage before
plugging in the appliance.
2.1.11. Connect the appliance to the mains power
supply with an earth socket withstanding a minimum
of 10 amperes.
2.1.12. The appliance's plug must fit into the mains
power supply socket properly. Do not alter the plug.
2.1.13. If using a multi plug check ratings carefully as
the current used by several appliances could easily
exceed the rating of the multi plug.
2.1.14. If any of the appliance casings breaks, im-
mediately disconnect the appliance from the mains
power supply to prevent the possibility of an electric