Mellerware MCM-1631 Manual Del Usuario página 7

MANUAL MCM-1631.pdf
- Place a recipient under the steam tube.
- Place the tube inside the liquid to be heated
- Select Steam Position with Control Knob (D)
- Press the "START" button (E). The pilot of the button
will begin to flash and when the right temperature is
reached the steam will start to flow out of the tube
- To better froth the milk, move the jar with slight
movements of the jar from top to bottom
- When you have enough, turn back the control knob
(D) to 0 position and remove the recipient.
- Use a damp cloth to clean the remains in the steam
pipe
Auto-off feature:
The Mellerware machines are designed to save energy
- To that end, after some minutes, if during this period
the user has not performed any action on it, the unit
switches to energy saving mode
- To return to normal operation you should just press
the start button (E)
Once you have finished using the appliance:
- Turn the appliance off, pushing the on/off switch (F) to
C
OFF position
M
- Unplug the appliance to the mains.
- Remove the water from the water tank.
Y
- Clean the appliance
CM
CLEANING
MY
a. Basic cleaning
CY
- Disconnect the appliance from the mains and let it cool
before undertaking any cleaning task.
CMY
- Clean the equipment with a damp cloth with a few
K
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning
the appliance.
- Do not let water or any other liquid get into the air
vents to avoid damage to the inner parts of the applian-
ce.
- Neither parts of this appliance are suitable for cleaning
in the dishwasher.
- After washing, dry all the parts before fitting them
together and storing.
b. Cleaning the Frothing Wand (Fig 1)
CAUTION! The frothing wand, frothing tip, and frothing
sleeve may be VERY HOT
-It is recommended to purge and wipe the frothing wand
after steaming milk to prevent deposits of dirt and
before turning off the machine
- To do this, pull the black frothing sleeve down and
clean under warm running water.
- Fill a cup with a bit of water, immerse the frothing wand
into the water, turn the Control Knob to the "Steam
7 26/10/18 8:05
icon". Press the START button, letting out a little steam.
Press again START button, stopping steam outlet and
and then turn the Control Knob(D) towards the position
"0".
- Use a cloth to dry the frothing wand and replace the
frothing sleeve
-In case no steam comes out of the frothing wand,
hardened milk blocks its path.
Carefully use a needle to loosen the milk residue from
the opening of the frothing tip
(fig 1) to remove any blockage,
-Once clean, rinse with running water from the tap and
reassemble it. Then steam again
How to deal with lime scale incrustations:
- For the appliance to work correctly it should be kept
free of lime scale or magnesium incrustations caused
by the use of hard water.
- To prevent this kind of problem, we recommend the
use of water with low lime or magnesium mineralisation.
- However, if it is not possible to use the kind of water
recommended above, you should periodically remove
the lime scale from the appliance:
- Every 6 weeks if the water is "very hard".
- Every 12 weeks if the water is "hard".
- To do so, we recommend the use of the specific
product Decal for this kind of machine, which can be
found in specialised shops and authorised technical
services.
- Homemade solutions are not recommended in the
de-scaling of this appliance, such as the use of vinegar.
Step 1
1.Fill in the water tank with detergent and water till MAX
mark.
2.Select any filter to put into the porta-filter. Position the
porta-filter to the unit.
3.Place a container right under the brewing outlet and
the steam tube&nozzle .
4.Rotate the knob to steam position, press the start
button for 5 seconds. The unit will start the descaling of
steam system for 5 minutes. During the descaling the
red and blue lights of start button will flash once one by
one. When the cycle is finished, the blue light will flash.
5.Rotate the knob to coffee position. The unit will start
the descaling of coffee brewing system for 5 minutes.
When the cycle is finished, the blue light will illuminate
Step 2
1.Pour out the mixture of detergent from the water tank.
Add fresh water into the water tank to max mark, and
put water tank back to the unit.
2.Press the start button to start the coffee brewing
system cleaning for 1 minutes. During the cleaning, the
red and blue lights will flash twice one by one. When the
cycle is finished, the blue light will flash.