Before Use - Mellerware MCM-1631 Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 9
MANUAL MCM-1631.pdf
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is
damaged.
- If any of the appliance casings breaks, immediately
disconnect the appliance from the mains to prevent the
possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor, if
there are visible signs of damage or if it has a leak.
- Keep the working area clean and well lit. Cluttered and
dark areas invite accidents.
- Do not place the appliance on hot surfaces, such as
cooking plates, gas burners, ovens or similar.
-The appliance should be used and kept over a flat and
stable surface.
- This appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for signs of
damage, and if the cord is damaged, the appliance
must not be used.
- Do not use the appliance, in the case persons insensi-
tive to heat (the appliance has heated surfaces).
- Do not touch the heated parts of the appliance, as it
may cause serious burns.
C
USE AND CARE:
M
- Fully unroll the appliance's power cable before each
use.
Y
- Do not use the appliance if its accessories are not
CM
properly fitted.
- Do not switch the appliance on without water.
MY
- Do not use the appliance if the on/off switch does not
work.
CY
- Do not move the appliance while in use.
CMY
- Respect the MAX and MIN levels
- Disconnect the appliance from the mains when not in
K
use and before undertaking any cleaning task.
- Unplug the appliance from the mains before refilling
the water tank.
- Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or
lack of experience and knowledge.
- Do not store the appliance if it is still hot.
- Only use water with the appliance.
- The use of bottled mineral water adapted for human
consumption is recommended.
- Never leave the appliance connected and unattended
if is not in use. This saves energy and prolongs the life
of the appliance.
- Do not remove the filter-holder when coffee is being
made, as at that time it is under pressure.
SERVICE:
- Make sure that the appliance is serviced only by
specialist personnel, and that only original spare parts
or accessories are used to replace existing parts/acces-
sories.
- Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability
5
26/10/18
8:05
null and void.
DESCRIPTION
A
Front panel
B
Water tank
C
Hot plate for warming cups
D
Coffee/Steam Control Knob
E
START Button
F
ON/OFF Switch
G
Steamer pipe
H
Filter holder
I
Measuring spoon
J
Ground coffee filter (1 cup)
K
Ground coffee filter (2 cups)
L
Supply cable
M
Drip tray
N
Drip tray grid
Fig. 1
Milk frother assembly
1.1 Frothing grip
1.2 Frothing wand
1.3 Removable frothing sleeve
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all the product's packaging has been
removed.
- Before using this product for the first time, it is advisa-
ble to test it only with water.
- Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the cleaning section.
- Before connecting the machine, check that ON/OFF
button (F) is not pressed, and Coffee/Steam Control
Knob (D) is in central position 0
Before first use (Priming the circuit):
This simple operation ensures optimum dispensing
and must be carried out:
- When first starting
-When the machine has been out of use for a long time
(1 or 2 weeks)
- When the tank has run out of water.
- Fill the receptacle taking care to observe the MAX
level
- Connect the appliance to the mains.
- Press the on/off switch (F) to ON position. The (E) pilot
light will come flashing on in red and blue colour by
turns.
-Without fitting the filter holder (H) (or with the filter
holder fitted, but without coffee), place a recipient under
the position of the coffee cup
- Select the coffee position by rotating the D control to
Tabla de contenido
loading

Tabla de contenido