Allmatic BIOS2 ECO Guía Para La Instalación página 18

6. Menu
Entering the menu:
To enter the base menu settings keep pressed the MENU button for at least one second
To enter the advanced menu settings keep pressed the MENU button for at least five seconds
Navigation into the menu:
It is possible to move from an entry to another one using UP[+] e DOWN[-] buttons,
To change a parameter keep pressed the MENU button for at least 1 second until the parameter begins blinking,
so release the key.
Use UP[+] and DOWN[-] buttons to change the parameter
At the end keep pressed MENU for al least 1 second until the parameter stops blinking to save the change.
A quick pressure of the menu key is enough to leave a menu
6.1 Base settings menu:
MENU
tCL tCL
tCL tCL Auto reclosing time (0 = disabled)
ttr ttr ttr ttr Auto reclosing time after transit(0 = disabled)
Trq Trq Trq Trq
Motor torque (running torque)
Slowing down mode
SSL SSL
SSL SSL 0 = normal
1 = fast with more torque
Step by step configuration
0 = normal (OP-ST-CL-ST-OP-ST...)
1 = alternated STOP (OP-ST-CL-OP-ST-CL...)
SbS SbS SbS SbS
2 = alternated (OP-CL-OP-CL...)
3 = condominium – timer
4 = condominium with immediate auto reclosing
Soft start
SSt SSt SSt SSt
0 = disabled
1 = enabled
DLY DLY
DLY DLY Second wing delay
Amplitude of slowing down (0 = disabled)
LsI LsI
LsI LsI P = personalized during learning
0...100% = percentage of stroke
ASL ASL
ASL ASL Anti slip
Number of motors
nmt nmt
nmt nmt 1 = 1 motor
2 = 2 motors
6-1622176 rev. 7 18/09/2020
DESCRIPTION
ITA ENG FRA
SELECTABLE
ESP DEU POR
Ex. Base menu
Ex. Advanced menu
VALUES DEFAULT
min-max
0-900 0
0-30 0
10-100 100
0-1 1
0-4 0
0-1 0
0-300 2
0-100 15
0-300 0
1-2 2
UNITS
s
s
%
s
%
s
6 / 12