Operation - Meister I-DRILL MAS 12ib Traducción De Las Instrucciones De Servicio Originales

5450480-Akku-Schra-man.qxd
(stiff screw-driving/drilling
select the torque most favourable for the
respective work.
9 – Operation
All standard screwdriver bits, bit holders
and drills, up to a diameter of 10 mm
(not in the scope of delivery), can be
clamped in the drill chuck (1) (Fig. 3).
The machine is provided with a quick-
action drill chuck. In this way, you can
replace the accessories in manual
operation rapidly and without drill chuck
keys (Fig. 4).
The drill chuck of clockwise/
anti-clockwise rotation machines
is always fixed with a left-hand thread
bolt. This is to be loosened in front
through the drill chuck (1) before a
drill chuck change. Left-hand thread
bolts can be loosened through
clockwise rotation only.
The screwdriver bits and drill bits with a
length of 50 mm can also be inserted
directly into the bit receptacle.
Prior to start up
Insert a wood screw gently into the hole
pre-drilled using a drill bit. Machine
screws should be started off gently. Fit
a suitable bit or socket to the battery-
powered screwdriver and place firmly
against the screw.
Starting and stopping
Caution! Risk of over winding
caused by screwing screws in
too deep. Watch the screwing
process carefully and, if necessary,
stop early and finish the process with
03.08.2010 12:19 Uhr
). Always an ordinary screwdriver. Always
practise first!
• Starting:
Press the ON/OFF switch (3): The screwing
process will start. Press and keep the
switch during the screwing process.
• Stopping:
As soon as the screw has been screwed
in or removed fully, release the On/Off
switch. The process is completed and
the working light will go out.
LED working light (9)
LED
make working in dark areas more safe.
The working light goes out when the
On/Off switch is released.
laser as this may result in damage to
the eyes.
Rechargeable battery charge
display (10)
If the on/off switch is pressed, the
rechargeable battery display indicates
the charging status of the rechargeable
battery:
3 LEDs light up: The rechargeable
2 LEDs light up: The rechargeable
1 LED lights up: Charging of the
Seite 69
When the unit is switched on, the
LED working light also comes on
to ensure better vision and to
CAUTION! LED is laser class 1!
Do not look directly into the
battery is fully charged
battery is half charged
rechargeable battery
required
69