Wall Plug - Viesta DH600-XA Manual De Instrucciones

8 pcs wall plugs
3. Using a drill bit with an 8 mm diameter, make 8 holes in the wall at the position that you reserve for installing
the chimney and cooker hood body. See Pic 2.
Pic. 2
1 - hole for inside chimney
2 - hole for outside chimney
3 - hole for hood body
4 - safety hole
1 pcs cooker hood
4 Insert wall plugs into the holes for hood body that you have drilled on the wall. And fasten 2 pcs screws
(ST4×30 mm) in the hole, leaving them 2 mm out of the wall. See Pic 2.
5 Hang the cooker hood onto the screws of the hole for hood body. See pic 3.
The parts required for step 3
2 pcs screws (ST4x30mm)
1
2
3
4
The parts required for step 4
2 pcs screws (ST4x30mm)
[ EN ● 7 ]
KEN002DH 23.02.2021
2 pcs wall plugs
2 wall plugs + screws
(ST4x30mm)
2 pcs wall plugs
Version: 4.0