Bluetooth ® Pairing - Rollei Smart Traveler Video Manual Del Usuario

Bluetooth remote control
®
1 Status indicator light
2 Shutter button
On/Off switch
3
Wrist strap hole
4
4
Turn on
Put the On/Off switch in the position of ON and the remote
control will enter the boot mode.
Bluetooth pairing
®
If the remote control is turned on, the status indicator light
will flash green. Activate the Bluetooth® function within the
settings of your smartphone. As soon as you see the Rollei
device on your display, click on it to connect both devices. If
the pairing was successful, the indicator light on the remote
control will be turned off.
You are now able to take pictures by pressing the release
button of the remote control when you are in the camera app
of your smartphone.
Note: This remote control supports iOS 5.0 or above and
Android 2.3.6 or above
Disposal
Dispose of packaging: For disposal, separate
packaging into different types. Cardboard and board
must be disposed of as paper and foil must be
recycled.
Disposal of old devices: Applicable in the European
1
Union and other European countries with systems
2
for the separate collection of reusable materials. Do
3 not dispose old devices into the household
waste! If the Rollei Smart Traveler Video is no longer used,
every consumer is legally obligated to dispose them separately
from the household waste, for example, at a collection site
of his community / city district. This ensures that devices are
properly recycled and negative effects on the environment are
avoided. Therefore electrical and electronic equipment needs
to be marked with the shown symbol
Conformity
The Manufacturer hereby declares that the CE marking was
applied to the Rollei Smart Traveler Video in accordance with
the basic requirements and other relevant provisions of the
following CE Directives:
EMC directive 2014/30/EU
RoHS directive 2011/65/CE
RED directive 2014/53/EU
2012/19/EC WEEE Directive
The EC Declaration of Conformity can be requested from the
address specified on the Warranty card.
Any change in design, specification and parameter are
subject to real product.
5