Initial Operation; Working Advice; Maintenance And Service; Maintenance And Cleaning - Bosch WorkLight Manual Original

OBJ_BUCH-2080-003.book Page 20 Monday, November 7, 2016 3:14 PM
20 | English
Operation

Initial Operation

Switching On and Off
To switch on the cordless worklight, press the On/Off switch 2 upward
without force.
To switch off the cordless worklight, press the On/Off switch 2 down-
ward without force.
To save energy, only switch the cordless worklight on when using it.

Working Advice

Applicational Possibilities (see figure B)
With the foldable multi-function clip 6, the cordless worklight offers many
applicational possibilities.
– Hang it to a nail or similar via the aperture in the multi-function clip.
– Attach it to the top edge of a door with the special hook mount of the
multi-function clip.
– Position it anywhere as a stand-alone unit with the multi-function clip
slightly opened.
Swivelling the Lamp Head
Depending on application, the lamp head 1 can be swivelled to 200°.
– As an uplight with the lamp head facing upward.
– Swivelled by 90° as a room light.
– With the lamp head swivelled down approx. 45° for anti-glare illumina-
tion of a workplace, e.g. a desk.

Maintenance and Service

Maintenance and Cleaning

When the battery is no longer operative, please refer to an authorised af-
ter-sales service agent for Bosch power tools.
The cordless worklight is maintenance-free and contains no components
that must be replaced or maintained.
To avoid damage, clean the plastic lens of the cordless worklight only with
a dry, soft cloth. Do not use cleaning agents or solvent.
1 609 92A 23V | (7.11.16) Bosch Power Tools