Cub Cadet L20 Manual Del Usuario página 19

Ocultar thumbs Ver también para L20:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 108
Operation
OCR function (model-dependent) H
The ignition lock is fitted with an OCR function,
which offers you user-controlled mowing, even when
reversing.
Notes on mowing
Only use the OCR function if absolutely
necessary.
Start the engine.
Î
Turn the ignition key [3] anti-clockwise from
Î
normal position to reverse-mowing position
and press the switch [1] a .
or
Press the switch [1] b for 3 seconds.
3 The indicator lamp [2] is lit. You can now mow
both when moving forwards and when reversing.
To terminate the OCR function, turn the ignition
Î
key clockwise to the normal position
or
Press the switch [1] b downwards and then
release it.
3 The indicator lamp goes out.
Notes on the ignition lock Ha
The OCR function is switched off automat-
ically once the key is turned to the normal
position or the engine is shut down (stop
position or shutdown of the engine through
the safety lock system).
Information about the ignition lock Hb
The OCR function is switched off auto-
matically once the OCR switch is pressed,
the engine is shut down or the safety lock
system automatically switches the engine or
the cutting mechanism off.
Mulching
With mulching, the grass is cut into small pieces
(approx. 1 cm) during mowing and is left on the
ground. A lot of the nutrients in the cut grass are
retained for the benefit of the lawn.
Ask your specialist dealer for appropriate mulching
Î
accessories.
Emptying the grass catcher (model-
dependent)
Read and observe the separate operating instruc-
Î
tions 'Grass Catcher'.
Note
Depending on the model, the device may
have a fill level indicator for the grass catch-
er. The switch X [1] is used to open and
close the grass catcher electromechanically.
Operation – See separate "Grass Collector"
operating instructions.
Tips on lawn care
A lawn comprises various grass types. If you mow
more frequently, the grown of strongly-rooting
grasses is favoured resulting in firm turf.
If you mow only rarely, the growth of tall grasses and
other weeds (e.g. clover, daisies) is encouraged.
To ensure you lawn grows healthily and uniformly,
without any lines, the cutting stripes must always
.
overlap by a couple of inches/several centimetres.
- The normal height of the grass is 40–50 mm.
Cut approximately one third of the overall height
as soon as the lawn has reached a height of
60–70 mm.
- Do not cut the lawn shorter than 45 mm as other-
wise the turf can be damaged during dry periods.
- Cut long grass in stages until normal height is
reached.
Switching on the headlights
(model-dependent) R
To turn the headlights on, set the switch to "ON".
Î
3 The headlights light up while the engine is run-
ning.
Note
The headlamps switch on and off automati-
cally on models without a light switch.
Note
Depending on the model, the headlights stay
lit up for approx. 10 seconds after the engine
has shut down and then switch themselves
off automatically.
EN
19
Tabla de contenido
loading

Este manual también es adecuado para:

769-11724fXz3Xt3qr95

Tabla de contenido