Setting Procedure; General Information - Baume & Mercier Clifton 10316 Manual Del Usuario

SETTING PROCEDURE

Setting the time
1. Pull the crown to Position 3.
2. Turn the crown to advance the hands (A, B) clockwise and position them at the desired time.
Note: When the hands pass the numeral 12, if the date changes, it means it is midnight and if the date
does not change it means it is noon.
3. When the start of the set time is announced (reference clock, radio, etc.), reset the crown to Position 1.
Rapid date change
1. Pull the crown to Position 2.
2. Turn the crown to advance the date (E) chronologically, until the desired date appears.
3. Reset the crown to Position 1.
For months with less than 31 days, the date must be changed manually at the end of the month.
Dual time function adjustment using the corrector
Warning: Do not adjust immediately after re-setting the time on your watch in a counter-
clockwise direction. This may damage the movement. In this specific situation, wait
approximately 30 minutes before setting the second time zone.
If your watch has a corrector, Press the corrector button (C1) several times to move the second time zone
hand (D) forward and position it to the time of the desired zone. To do this, use the small tool provided
in the watch packaging.

GENERAL INFORMATION

Care recommendations
Your Baume & Mercier watch was both designed and manufactured with great care. Please read our
recommendations for use and care on www.baume-et-mercier.com.
International warranty
Your Baume & Mercier watch is covered by the Baume & Mercier International Warranty.
The conditions of the Baume & Mercier International Warranty are available on www.baume-et-
mercier.com/customer-service/warranty.html.
Other information
If you have any questions, please visit our website www.baume-et-mercier.com.
You can also contact our authorized retailers in your country (list available on our website www.baume-
et-mercier.com) or contact us directly via our website using the contact form or by calling one of our
Client Relations Centers (www.baume-et-mercier.com/customer-service/contact-us.html).
Setting procedure – Automatic -. hour, minute, centre seconds, date, power reserve, dual time 5