URBANGLIDE Ride 100 Pro Manual De Instrucciones página 11

CHARGING STEP
• Open the charging port cover, Make sure the charging port is clean and dry.
• Connect the charger with the battery and the other end with power(100V-240V;50/60Hz),
make sure the charging indicator is on
• When the indicator light on the charger changes, indicating that the charging process is
normal, otherwise check if the line connection is good.
• When the indicator on the charger has color change, it indicates that the battery has been
filled to 99%, Please stopcharging; long time over charge will affect the battery life.
Method 1
Charging step :
Charging port:
Tips:
Remove the battery to open the silicone charging port, plug the charger DC plug into the battery charging port. Plug the power
cord into the charger, then connect the other port to the socket (100V-240V; 50/60Hz) and confirm the charger indicator is on
normally.Cover the charging port with the anti-dust cap in case some metal may touch the charging port and bring short-circuit
after charging finished.
Method 2
Battery connector
11
Charging port