Hilti PS 1000 X-Scan Guia De Inicio Rapido página 8

3. Imagescan
The graphical representation of the EM sensor data in the
top view can be switched on or off (standard setting) at
"Visualization" -> "EM sensor". When the EM sensor data
parameter is set to "Filtered", an additional filter is applied
to the EM sensor data, which can be of advantage in the
event of very weak signals. The disadvantage of this is that
the resulting resolution is slightly lower.
en
Graphical representation of the EM sensor data is indi-
cated additionally by a symbol in the upper left corner
of the display.
-NOTE-
In cross section images, a graphical representation of the radar data is always displayed.
The parameter "Visualization" -> "EM sensor" lets you select the scope of the EM sensor data to be displayed. You
may choose between "Standard", "X-data" and "Y-data".
EM data "Standard"
Use the "Standard" setting when you wish to display live
cables running both horizontally as well as vertically.
EM data "X-data"
When set to "X-data", priority is given to displaying live
cables that run vertically.
6