Idiomas disponibles
Idiomas disponibles
1 Introduction
The Sandberg In Car Laptop 12V Adapter 90W
allows you to power your laptop while you are
travelling in a car. This means you can be sure
that you won't run out of charge while you're
on the move. The connector from the power
supply can be adapted to fit your laptop by
swapping it with one of the many connector
types enclosed.
Disclaimer: The use of this product is entirely
at the consumer's own risk. Sandberg A/S, its
dealers and distributors cannot be held liable
for any damage to connected equipment, loss
of data, etc.
2 Connection IMPORTANT! READ THIS
BEFORE YOU CONNECT ANYTHING!
1. Find out what the required supply voltage (V)
is for your laptop. You will normally find
this marked on the bottom of your laptop
or in the documentation that came with it.
2. The supply voltage (V) is indicated on each
of the enclosed adapters. Find the adapter
that is compatible with your laptop, both in
regard to supply voltage and shape. You
MUST then check whether your laptop has a
+ on the inner pin and a – on the adapter
jacket. If this is NOT the case, this power
supply must NOT be used. Connect the
adapter to the cable on the power supply, so
that the three pins on the adapter fit into the
three holes in the connector on the cable.
Then connect the adapter to your laptop's
power supply port.
3. Connect the power supply to a 12 volt plug.
Your laptop will now receive power.
If you need further help or assistance with your
Sandberg product, you will find details about
this on the penultimate page of this user guide.
Have fun with your Sandberg Laptop AC Adapter
Mini 90W.
2
