Product Information - Trust UPS Serie Guia Del Usuario

User's manual

Product information

A: On/Off button
i
B: Status LED
- AC power: Lit steady
- Battery power: Lit flash
Installation
PC off
1
Use power cable from PC to connect UPS to AC socket
2
Use loop through cable (I) to connect PC to UPS Backup output (H)
Device connected to Surge Only output (G) does not get UPS backup!
UPS least 20cm away from monitor!
UPS on
3
The UPS might be battery low due to its self-discharge characteristic; suggest to charge 8 hours before
using battery power!
PC on
4
Replacing fuse
UPS completely off
5
6
Use fuse of same rating (250V, 8A)!
(B) stores a backup fuse!
Open fuse holder
Replace a proper fuse at position A
Reminder
UPS is charged only when AC power is supplied and UPS is on!
Fully discharge then recharge the battery every 3 months for longer battery life!
Connect incoming analogue phone line to D; Connect a telephone or modem to C!
Backup time is related to the connected devices and battery condition!
UPS does not have dial-up function nor smart management like message alarm!
Conductive device, like laser printer, is suggested to connect to the Surge Only output!
C: Phone/Modem out
D: Phone line in
E: AC input
F: Fuse holder
1
G: Surge only output
H: Backup output
I: Loop through cables