Rotating The Double-Sided Drive - Manfrotto MVA511FF Manual

ROTATING THE DOUBLE-SIDED DRIVE

The double-sided drive can be rotated to allow the gear mechanism to move in either direction .
To rotate the double-sided drive (see fig . 4):
If fitted, loosen and remove the friction wheel/drive gear that is attached to the shortest side
of the double-sided drive "A", "B" .
Using the 3mm Allen key supplied, loosen the screw securing the collar "B" .
Rotate the double-sided drive 180 degrees, until an audible 'click' is heard "C" .
Using the 3mm Allen key supplied, tighten the screw to secure the double-sided drive in
place "D" .
If required, install and secure the friction wheel/drive gear to the shortest side of the dou-
ble-sided drive "D", "E" .
Fig. 4 Rotating the double-sided drive
GB
8