Assembly; Assembling The Marking Disc; Assembling The Friction Wheel/Drive Gear - Manfrotto MVA511FF Manual

ASSEMBLY

ASSEMBLING THE MARKING DISC

The Manfrotto Follow Focus comes supplied with a marking disc that is easy to remove and re-
place . The marking disc clicks into place over the handwheel .
To assemble the marking disc onto the Manfrotto Follow Focus (see fig . 2):
Ensure that the cut out on the marking disc "A" is aligned with the point on the handwheel "B" .
Slide the marking disc over the handwheel and it push into position until an audible click is
heard .

ASSEMBLING THE FRICTION WHEEL/DRIVE GEAR

The Manfrotto Follow Focus comes supplied with a Ø35 mm friction wheel and a 50 tooth drive
gear . The friction wheel/drive gear is secured to either the front or the rear of the double-sided
drive .
To assemble the friction wheel or drive gear (see fig . 4):
Select either the friction wheel or the drive gear for the lens in use .
Ensure that the key-way on the friction wheel/drive gear aligns with the key-way on the dou-
ble-sided drive shaft and push into place "A" .
Rotate the knurled screw on the friction wheel or drive gear in a clockwise direction to secure
to the double-sided drive "B" .
Fig. 3
GB
Fig. 2 Assembling the marking disc
Assembling the friction wheel/drive gear
7